General Operation on the TV Set
5. Function ( FUNC.) Button
FUNC.
By pushing this button repeatedly, the Picture
Control Function and Sound Control Function
will be displayed.
All functions are set at factory preset level (is
showed in yellow colour).
Press the Volume Up " + " or Down ” - ”
buttons to adjust the level of selected functions.
The sequence is as follows ;
COLOUR
NTSC^-TINT
BRIGHT
CON*JRAST
SHARPNESS
BAsi
t
TREBLE
BALANCE
NTSC-TINT will appear
if AUTO and NTSC
4.43 or NTSC 3.58
is selected.
6. System Buttons
System 1 Select Operation
It-SYS-I
0
The System button is automatically set
to the AUTO mode. If a clear picture
cannot be obtained when receiving
broadcast or AV signal, push this button
repeatedly until the optimum picture is
received. Push System 1 button to the
appropriate mode if black and white
picture received is shaking slightly.
When this button is pushed, you change
the on-screen display as shown below ;
NTSC 3.50
NTSC 4.43 ^
'SECAM
4
' PAL
f
' AUTO
A
j
y
^—
>
^—
System n Select Operation
(for TV mode only)
H-SYS.- I
When the sound is not dear or no sound
is produced on channel number selected,
push this button repeatedly until the
optimum sound is obtained.
The selected system mode on each chan
nel number position is automatically
memorized.
The on-screen change as follows :
17
