Set Up Features
Clock (Mdnual) — clock (when set) will display On
Screen at initial turn on, after a channel change and when
pressing it must be set in order to operate the dual
Timer feature.
1. Press ^3 .
2. Press ^ or or ^ to highlight the Set Up
Icon.
3. Press
to display the Set Up Menu.
NOTE: This menu is not available when AUTO
POWER ON is set.
4. Press ^ or W to highlight CLOCK .
5. Press ^ or ^ to select MANUAL.
6. Press ^ or ^ to highlight SET TIME.
7. Press ^ or ^ to Set Hours (set AM/PM
accordingly).
8. Press W to highlight minutes position.
9. Press or ^ to set minutes.
10. Press ^3 twice to exit Menus.
NOTE: Pressing!
Up Icon.
again will return you back to the Set
Set Day —The day of the week must be set in order to
operate the Dual Timer feature.
1 Press ^3.
2. Press ^ or Wand‘s or to highlight the Set Up
Icon.
3. Press ^
I to display the Set Up Menu.
4. Press ^ or W to highlight SET DAY.
5. Press or ^ to select proper day of the week.
6. Press I twice to exit Menus.
Mode (TV or Cable)
IMPORTANT NOTE: The proper input mode must be
selected for the type of signal at the antenna input.
• TV is used when the television is not connected to a
Cable TV System, for example, when usinga VHF/UHF
antenna (Channels 02-69).
• CABLE is used when the television is connected to a
Cable TV System and when not using a Cable Box
(Channels 01-125).
NOTE: Some Cable TV Systems encode (scramble)
program material on specific channels. A cable
company supplied decoder Is required to
reproduce an acceptable picture. Certain Cable
TV Systems offset some channels to reduce
interference. It will be necessary to use the cable
company supplied converter to receive these
specific channels.
1. Press (^3).
2. Press ^ or Wand“^ or ^ to highlight the Set Up
Icon.
3. Press ^3 to display the Set Up Menu.
-32-
Press^ or W to highlight MODE.
Press or ^ to select TV or CABLE.
Press ^3 twice to exit menus.
