6
10- Connect the Injectors to the manifold with a light squeezing action. Lubricate the O-rings with clean engine oil. Once in place, use Loctite® 222
on the threads of two 8-32 x ⁄” slotted panhead screws and tighten to 15-20 in-lbs. Replace these screws if the fuel rail is removed to perform
service work.
11- For 2001-'05, install the backing washer and O-ring on the fuel supply tube. Lubricate the O-ring with clean engine oil. When the tube is in place,
position the Y-shaped clip on the fuel rail and tighten the Loctite 222 coated T20 Torx button head M4 x 7 x 12mm screw to 18-23 in-lbs.
12- Gently push the injectors downward toward the manifold to increase clearance for connecting the wire connectors. Connect the adapter
wiring harnesses to the fuel injectors. Listen for an audible click and then gently pull on the connection to verify positive engagement.
Picture 10 (2001-'05)
Picture 11a
Picture 11b
Picture 12 (2001-'05)
Picture 10a (1995-'05)
Picture 12a (1995-'01)
