KIP PrintNET
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. 2011 KIP America, Inc.
- 45 -
Setup of Custom Filters
Administrators logged into KIP PrintNET have the ability to Manipulate or Create filters that will be used
by the other KIP Software Applications. The five default filters are: Cad (Line), CAD/GIS (Photo), Graphics
(Line), Graphics (Photo), and Scan-To-File. These five filter names will remain constant however the
administrator has the ability to manipulate their settings to best match the needs of the customer.
To Modify default filters follow these steps:
1. Select Filter (will highlight red)
2. Make the appropriate changes to the settings
3. Select Save (will highlight green)
4. Custom filter settings have now been saved
The sixth filter is a custom filter and can be configured to best match the specific needs of the customer.
There is an unlimited amount of custom filters that can be made by the
administrator.
To create custom filters follow these steps:
1. Select custom Filter (will highlight red)
2. Create a New Preset Name
3. Make the appropriate changes to the settings
4. Select Save (will highlight green)
5. Custom filter settings have now been saved and available in the drop down
list from within KIP Request, KIP PrintNET, KIP Windows Driver and KIP AutoCAD
driver..
