C200 3-59
Assistant tool for C200
3
SNMP Setting - Common Setting
Specify the SNMP settings.
2
Reminder
In order to apply changes to the settings for parameters marked with , the machine must be restarted
(turn it off, then on again).
When the machine is turned off, then on again, turn the machine off with the sub power switch before
turning off the main power switch. In addition, wait at least 10 seconds to turn the machine on after
turning it off; otherwise, the machine may not operate correctly.
SNMP Setting - SNMP v1/v2c Settings
Specify the SNMP v1/v2c settings.
Item Description
SNMP v1/v2c Setting Select whether or not SNMP v1/v2c is used.
SNMP v3 Setting Select whether or not SNMP v3 is used.
UDP Port Number Type in the UDP port number. (Range: 1 to 65535; Default: 161)
Item Description
Write Setting Select whether to enable or disable write permissions.
