Problem Possible cause Solution
The cleaning uid level is
too low. If the uid volume
in the cleaning chamber
drops below the minimum
level during the cleaning
program, the program
aborts.The cleaning light and
the ‘cleaning chamber empty’
symbol ash at intervals and
the holder returns to its
starting position.
Rell the cleaning
chamber with
cleaning uid to
a level between
the two lines (see
chapter ‘Cleaning and
maintenance’).
You have used another
cleaning uid than the
original Philips cleaning uid.
Only use HQ200
Philips Cleaning Fluid.
The Jet Clean
System does not
work when I
press the on/off
button.
The Jet Clean System is not
connected to the mains.
Put the small plug in
the Jet Clean System
and put the adapter
in the wall socket.
You have not placed the
shaver in the Jet Clean
System properly, so there
is no electrical connection
between the Jet Clean
System and the shaver.
Press the shaver
tightly into the
holder to lock it into
place.
The shaver is
not fully charged
after I charge it
in the charger/
Jet Clean
System.
You have not placed the
shaver in the charger/Jet
Clean System (specic types
only) properly.
Make sure you press
the shaver until it
locks into place.
ENGLISH
