MAINTENANCE
CUSTOMER RESPONSIBILITIES
SERVICE
RECORDS
SCHEDULE
S
D
ERVICE
ATES
Fill in dates as
you complete
regular service
After
first Z
Hours
Before
Each
Use
As
Needed
Every
5
Hours
Every
10
Hours
Every
25
Hours
Each
Season
Before
Storage
Tighten All Screws & Nuts
Lubricate Pivot Points
Lubricate Auger Shaft (See
Shear Bolt Replacement
Lubricate Disc Drive Plate Zerk
Check Spark Plug
Check Engine Oil Level
I/*
Change Engine Oil
Check Fuel
Drain Fuel
Check Auger Clutch Cable
Adiustment (See Cable Ad|)
p''
t/'
Check Traction Clutch Cable
Adiustment (See Cable Adi)
Check Drive Bells
PRODUCT SPECIFICATIONS
HORSE POWER:
12.5 HP
DISPLACEMENT: 21.82 cu. in.
GASOLINE CAPACITY: 4 quart
(unleaded)
OIL (26 oz. Capacity) : 5W-30
SPARK PLUG:
Champion RJ19LM
(Gap .030) or
Equivalent
VALVE CLEARANCE: Intake: 0.10 In.
Exhaust: .010 In.
Some adjustments will need to be made pe-_
riodically to properly maintain your snow
thrower.
LUBRICATION CHART
Lubricate
Disc Drive
Plate Zerk
with a Hi
Temp EP
Moiy Grease.
GENERAL RECOMMENDATIONS
The warranty on this snow thrower does not
cover items that have been subjected to op
erator abuse or negligence. To receive full
value from the warranty, the operator must
maintain the snow thrower as instructed in
this manual. The above chart is provided to
assist the operator in properly maintaining
the snow thrower.
Lubricate the Auger Shaft.
Coat with a clinging type grease
such as Lubriplate or fiber
impregnated grease.
