www.vf-engineering.com BMW E36 (‘96-’98 incl. ‘99 M3) US MODELS
PAGE 10 of 28 P/N: VFM28/38/40-01
© 2006 VF Engineering
All rights reserved
Rev 1.10.25.06
14. Remove the OEM intake manifold support bracket, located underneath the manifold.
15. Clamp the new double ‘S’ shaped crankcase hose to the upper fitting on the oil separator, with the short side
of the hose connected to the separator.(***NOTE: shorter hose shown in picture below) Return the oil
separator unit to original position and secure using the three aluminum spacers and bolts supplied.
