204 No engine deceleration detected 24
205
Brake light
Brake light test switch
206 False code set
300 Diagnostic circuit fault
301 EGS voltage supply
No voltage to EGS control unit
Check wiring harness
A5S 560Z (5HP-30) - EGS 9.XX
CODE DEFINITION OF FAULT
EGS
PIN OUT
POSSIBLE CAUSES
01 Pressure regulator - EDS 2 1
Anomalous signal
Break in wiring
Short in wiring
02 Solenoid Parking/Neutral Lock 2
Break in wiring
Short in wiring
Defective valve winding
04 Pressure regulator - EDS 4 4
Anomalous signal
Break in wiring
Short in wiring
05 Pressure regulator - EDS 1 5
Anomalous signal
Break in wiring
Short in wiring
08 Shift lever position L2 8 Vehicle accelerated while shift lever in park or neutral
position
Engine was started and the EGS control has not
detected park or neutral position signal
09 Shift lever position L3/L4 37, 9
Break in wiring
Short in wiring
Short in sensor
More than one program selector switch is applied to
ground
12 Program selector switch 12, 13, 45
Short in wiring
Short in sensor
More than one program selector switch is applied to
ground
16 Turbocharger speed sensor 16, 44
No signal
Anomalous engine speed signal
18 Kickdown switch 18
Short to ground
Anomalous signal
(19) ASC monitoring 19
Break in wiring
Short in wiring
EGS detected anomalous ASC signal
ASC operation detected while shift lever in park or
neutral
22 ATF sump temperature sensor 21, 22
Break in wiring
Short in wiring
26 Battery voltage + 26
Break in wiring
Check battery
30 of 32 11/15/00 9:55 AM
bmwcodes http://www.baumtools.com/bmwcodes.htm
