bintec RV120w-4G
09.12.2014
Subject to technical alterations
Page 4 / 11
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
Wireless LAN
Receiver Sensitivity @ 2.4 GHz
802.11n 40 MHz
MCS0 -92 dBm; MCS1 -91 dBm; MCS2 -89 dBm; MCS3 -86 dBm; MCS4 -82 dBm; MCS5 -79 dBm;
MCS6 -77 dBm; MCS7 -75 dBm; MCS8 -91 dBm; MCS9 -91 dBm; MCS10 -89 dBm; MCS11 -85 dBm;
MCS12 -82 dBm; MCS13 -78 dBm; MCS14 -77 dBm; MCS15 -74 dBm
Receiver Sensitivity @ 5 GHz
802.11n 20 MHz
MCS0 -96 dBm; MCS1 -93 dBm; MCS2 -91 dBm; MCS3 -88 dBm; MCS4 -85 dBm; MCS5 -81 dBm;
MCS6 -79 dBm; MCS7 -77 dBm; MCS8 -94 dBm; MCS9 -92 dBm; MCS10 -90 dBm; MCS11 -87 dBm;
MCS12 -84 dBm; MCS13 -80 dBm; MCS14 -78 dBm; MCS15 -76 dBm
Receiver Sensitivity @ 5 GHz
802.11n 40 MHz
MCS0 -91 dBm; MCS1 -89 dBm; MCS2 -87 dBm; MCS3 -84 dBm; MCS4 -81 dBm; MCS5 -78 dBm;
MCS6 -76 dBm; MCS7 -74 dBm; MCS8 -90 dBm; MCS9 -89 dBm; MCS10 -87 dBm; MCS11 -83 dBm;
MCS12 -80 dBm; MCS13 -77 dBm; MCS14 -75 dBm; MCS15 -73 dBm
Output power (without antenna
gain)
Adjustable in following steps: 5, 8,11,14,16, 17 dBm and maximum. Maximal power varies
depending on data rate and frequency band.
LTE(4G) / UMTS(3G)
Supported standards LTE - 4G (Download up tp 100 Mbit/s and Upload up to 50 Mbit/s), UMTS - 3.5G (HSPA+), GPRS-,
Edge- and GSM support
LTE (4G) frequencies 800/900/1800/2100/2600 MHz
UMTS - HSPA (3.5G) / EDGE -
GPRS (2G) frequencies
850/900/1800/1900/2100 MHz
VPN
PPTP (PAC/PNS) Point to Point Tunneling Protocol for establishing fo Virtual Privat Networks, inclusive strong
encryption methods with 128 Bit (MPPE) up to 168 Bit (DES/3DES, Blowfish)
GRE v.0 Generic Routing Encapsulation V.0 according RFC 2784 for common encapsulation
L2TP Layer 2 tunnelling protocol inclusive PPP user authentication
Number of VPN tunnels Inclusive 5 active VPN tunnels with the protocols IPSec, PPTP, L2TP and GRE v.0 . Up to 30
simultanoues, active VPN tunnel possible with a additional license. Up 100 profiles of VPN tunnels
are definable.
IPSec Internet Protocol Security establishing of VPN connections
Number of IPSec tunnels Inclusive 5 active IPSec tunnels. Up to 30 simultanoues, active tunnel possible with a additional
license. Up 100 profiles of tunnels are definable.
IPSec Algorithms DES (64 Bit), 3DES (192 Bit), AES (128,192,256 Bit), CAST (128 Bit), Blowfish (128-448 Bit), Twofish
(256 Bit); MD-5, SHA-1, RipeMD160, Tiger192 Hashes
IPSec hardware acceleration Integrated hardware acceleration for IPSec encryption algorithms DES, 3DES, AES
IPSec IKE IPSec key exchange via preshared keys or certificates
IPSec IKE Config Mode IKE Config Mode server enables dynamic assignment of IP addresses from the address pool of the
company. IKE Config Mode client enables the router, to get assigned dynamically an IP address.
IPSec IKE XAUTH (Client/Server) Internet Key Exchange protocol Extended Authenticaion client for login to XAUTH server and
XAUTH server for loging of XAUTH clients
IPSec IKE XAUTH (Client/Server) Inclusive the forwarding to a RADIUS-OTP (One Time Password) server (supported OTP solutions
see www.bintec-elmeg.com).
