Changing the Annex Setting of the FRITZ!Box
29
Configuring the Internet Connection Without the Wizard
You can also set up the Internet connection without the Wiz-
ard.
Choose this method if the FRITZ!Box is connected to a DSL
modem or a DSL router, or integrated into an existing net-
work.
1. Open the FRITZ!Box user interface (see page 25).
2. Enable the expert settings in the “System / Expert
Mode” menu.
3. Select the “Internet / Account Information” menu and
enter your account information.
Also take advantage of the Help available in the FRITZ!Box
user interface.
6.2 Changing the Annex Setting of the FRITZ!Box
The FRITZ!Box cannot establish a connection to the DSL
network. This is signaled by the continued flashing of the
“Power” LED.
The kind of DSL (Annex A, B, M or J) set in the FRITZ!Box is not
the same as the annex used on your DSL line.
1. Contact your Internet Service Provider to find out which
annex is used on your DSL line.
2. Connect a computer with the FRITZ!Box either wirelessly
via WLAN or using a network cable.
3. Open the FRITZ!Box user interface.
4. Open the “Internet / DSL Information” and select the
“Line Settings” page.
5. In the “Annex Settings” area, make sure that the annex
working on your DSL line is set. Save your settings by
clicking “Apply”.
Cause
Help
FRITZ!Box 3270-en.fm Seite 29 Mittwoch, 14. März 2012 2:44 14
