30
Configuring the Internet Connection for Cable
After the annex setting has been changed, the FRITZ!Box re-
starts automatically. The connection to the DSL network has
been established as soon as the “Power” LED stops flashing
and remains lit up.
6.3 Configuring the Internet Connection for Cable
With an additional cable modem you can also use your
FRITZ!Box 3270 on a cable connection. Then the Internet con-
nection is established and controlled by the FRITZ!Box itself,
so that in this operating mode, too, all FRITZ!Box functions
(like Internet telephony, firewall) are available without restric-
tion.
1. Open the FRITZ!Box user interface (see page 25).
2. Select “Wizards” in the menu.
3. Click the “Check Internet Connection” Wizard and follow
the instructions.
6.4 Configuring the Internet Connection for the Mobile Telephone
Network
With a USB modem you can also establish the Internet con-
nection with your FRITZ!Box 3270 via the mobile telephone
network. A USB modem for mobile Internet access
(UMTS/HSPA) is required for this. The FRITZ!Box supports
UMTS/HSPA modems from various manufacturers.
The USB modem is already installed on the USB port of the
FRITZ!Box.
1. Open the FRITZ!Box user interface (see page 25).
2. In the “Internet” menu, the sub-menu “Mobile Tele-
phone Network” is displayed.
The “Mobile Telephone Network” menu is not available
until the UMTS/HSPA modem has been connected to the
FRITZ!Box. From this point on the menu is always avail-
able, even when the USB modem has been disconnect-
ed.
FRITZ!Box 3270-en.fm Seite 30 Mittwoch, 14. März 2012 2:44 14
