Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Fuel pressure sender -G247- -1- (tightening torque: 22 Nm)
• Make sure that connecting piece is tightened to specified
torque “30 Nm” before installing fuel pressure sender -G247-
Hall sender -G40- -1-
Air mass meter -G70- -1-
Fuel pump control unit -J538- -1-
• Adaption must be performed after renewing fuel pump control
unit -J538- . Basic setting, measured value block 103, refer to
→ Rep. Gr. 20
Audi A3 2004 ➤
Direct petrol injection and ignition system (4-cyl. 2.0 ltr. 4-valve turbo) - Edition 11.2005
8 Rep. Gr.24 - Mixture preparation - injection
