Picture W-4: The water fill for the external fresh water tank, (located at driver-side front door post).
2. - FILLING WATER TANKS WITH EXTERIOR CITY WATER CONNECTION:
The fresh water tanks can also be filled through the City Water Inlet located behind the rear lockable driver side
access drawer. The use of the city fill is not possible when in the “Winter Use” mode.
NOTE: Prior to using city fill, ensure water system is in “Summer Use” mode.
Both fresh water tanks can be filled from the city water connection. You have the option to fill both tanks
together or separately depending on the position of the inside valves.
To fill the tank:
1. Connect City Water Hose and open adjacent City Water Valve (Picture W-10). Remove the Orange
Gravity-fill Plug for added venting of the Fresh Water Tanks.W-7).
2. Open the water source moderately.
3. When the tank is full, water will overflow in the same manner as when using the gravity fill..
4. Interior Tank Drain Valve in open position (Picture W-1) will fill both tanks. (open is aligned with water
line)
5. If the Interior Tank Drain Valve is closed (Picture W-1), the tanks can be filled separately. The tank
selector valve (the one with the red handle) will allow this separate tank filling -- valve in down position
will fill the Exterior (Lower) Tank, valve in up position will fill the Interior (Upper) Tank.
6. Shut off City Water Hose and close the City Water Tank-fill Shut-off Valve (see Picture W-8).
Page6of26
