1. - FRESH WATER TANK GRAVITY FILL:
Fresh water tanks can be filled individually using the gravity fills located at the driver side entry door
and the passenger side rear door. Both tanks can also be filled using the rear fill if the interior tank drain
valve (Picture W-2) located beside the water pump is open. (open is aligned with water line)
Picture W-2: Interior tank drain valve in closed position.
a) - FILLING THE INTERIOR FRESH WATER TANK:
The Interior Fresh Water Tank can be filled through the gravity fill located in the passenger-side rear door
opening (see Picture W-3). To fill the interior tank:
1. Open the rear passenger door.
2. Open the gravity fill cover by removing the orange plug, (see Picture W-3).
3. Insert the hose and fill the tank using moderate pressure, (excessive pressure will result in a back
flow of water).
4. When the tank is full, water will overflow back through the gravity fill hole.
5. Overfilled tanks will spill out through tank vents. This is evidenced by water dripping from the rear
passenger side corner of van.
Page4of26
