Unblocking programs temporarily
1 If you iry to watch a TV program that exceeds the rating
limits you set. the TV will enter into the program block
mode.
THIS PflOGRAH HAS BEEN BLOCKED
TV-PG L V
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
BLOCK CHANNEL function
With the CH.VNNHL BLOCK function, you can block
speciHc channels. The TV will not be able to tunc these
channels with the CHAIMIMEL A/T buttons or Channel
INiumber buttons, unless you clear tiie setting.
This TV has 8 memory spaces total. 4 for TV mode and 4
for C'ABLL mode.
To block channels
1 Select a channel vou w ant to block.
2
If you want to watch the blockctl program temporarily,
press MUTE
Pre.ss the Number
buttons (0-9) to enter the
4-digit code you have
stored.
If the number is correct, the
block mode wdll be
released.
After
1
second, normal
picture Will appear.
All blocking is disabled until the TV is turned off.
It will be enabled when the power is reapplied.
BLOCKING IS ACTIVE
PLEASE ENTEfl PIN CODE
TO temporarily UN-5L0CK
SELECT|0-?' ENDjEXa;
if a wrong pin code is
entered, the message
appears.
Enter the correct code
aeain.
INCORRECT PIN CODE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
S£LECT|G-9t ENDIEXIT'
2 Select -'BLOCK
Cl iANNErL" in the V-CI Ml’
CONTROL meiui by
pressing T or ▲.
3 Press -^or^ to display the
BLOCK CHANNEL meniL
5L0CK channel
MOVE ;T a i 3EL£CT|-< ►
BLOCK CHANNEL
I
SET;CLEAR
0 '* C
SELECT > ► 1 5ET[T
EKD|Exi T
Press ◄ or ► to select
“SET”, then press T or A
until the channel number to
be blocked (“2” in this
example) replaces “0” on
the display.
BLOCK CHANNEL
i SET :CLEAP
0 D 0
SELECTI-A ► : SET[T
END[EXIT]
5 Repeat steps 1 to 4 for other channels.
6 Select another channel before liirning off the TV.
To restore channels
1 Select "CLLAR" Ibllowhig the
abo\'c steps 2 to 4.
2 Press T or A until ”0”
rcplaee.s the ehiiiincl
mimbers.
BLOCK CrtANNE L
SET iCcEARI
55 10
6 2
SLl iiCr 1 <
CrSAn'T A 1
r NM by 11;
u 0 0 0
EXIT U) cra.HC the dlsphiv.
31
