
7
Number Connection Description
Power Cable In For the power cable.
USB 2.0 Connector
For USB-type devices, including memory, hard disk, CD-ROM, key-
board, and mouse.
LAN Connector For a LAN cable.
RS-232C Out For the RS-232C cable.
DisplayPort with HBR2 (Out)
Connects the cable to a monitor that supports DP (Display-
Port) (resolution: up-to 3840x2160)
Power Button Turns MP700 ON/OFF.
RGB Connector (output) Connects the cable to a monitor that supports RGB (VGA).
DP Output Port Connects the cable to a monitor that supports DP (DisplayPort).
Monitor Docking Port Connects the MP700 to a monitor.
USB 3.0 Connector
For USB 3.0 devices.
LINE-OUT Connector For a LINE-OUT cable for analog audio transfer.
We recommend you to use the items provided with your MP700 and follow our instructions for integrating
the product with your monitor in order to ensure the correct results.
1
Place a soft cloth on the table and put the
product on the table with the screen facing
downward.
Push the MP700 into the compartment to
mount it.
2
Secure the MP700 to the set using the four
screws provided.
Monitor Integration
**WS50 Model
● Be careful of sharp edges on the rail and the
handle.
● Attaching the product with non-standard
screws may cause damage or the product to
fall down. LG Electronics is not liable for any
accidents relating to the use of non-standard
screws.
● Do not over tighten the screws as this may
cause damage to the product and void your
warranty.
Attention
● The illustrations shown are to guide your integration and may differ from your product.
Attention