2. The hub (router/switch) connection may be configured as described below.
a. Turn the router power on.
b. Connect the router port (excluding the WAN port) and the network port of the MP700 using a network cable.
c. As in step "a" of item 1, check if the tray icon is displayed correctly. If it is not displayed correctly, go through the
whole procedure in item 1 to check your network settings.
d. If you wish to connect to an external network, connect the external network cable to the WAN port.
Make sure to read the Important Precautions
before using the product.
Keep the User’s Guide(CD) in an accessible
place for furture reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
WARNING - This is a class A product. In
a domestic environment this product may
cause radio interference in which case the
user may be required to take adequate
measures.
MODEL
SERIAL
Temporary noise is normal when powering
ON or OFF this device.
