6
Network Printer Setup
USB
to
Wireless
Changing from USB to wireless network connection
If you initially set up your printer using a USB connection to your computer, you can switch the
connection to a wireless network connection by following these steps.
Windows
If your printer
is not found
during software
installation...
Troubleshooting for a wireless printer setup
Check that your printer is connected to your network.
Run a Wireless Network Test to check that your printer is on the network. To do this:
1. On the HP Photosmart front panel, press the Wireless button to display the Wireless menu
on the printer display.
2. Select Run Wireless Network Test on the display.
3. The Wireless Network Test Report is automatically printed.
• Check the top of the report to see if anything failed during the test.
• See the Diagnostic Summary of all tests performed, and whether or not your printer
passed.
• ViewtheCongurationSummarytoidentifytheNetworkName(SSID),Hardware
Address (Mac), and IP address.
Mac
If your printer is not connected to the network:
1. Press the Wireless button on the Printer Display to open the Wireless menu. Select
Wireless Setup Wizard.
2. Follow the instructions on the screen.
For additional help with setting up a wireless connection, go to the Wireless Printing Center
site: www.hp.com/go/wirelessprinting.
To change from USB to wireless connection:
1. Click Start, click HP, click Photosmart C310
series, then click USB to Wireless. Keep
your USB cable connected until prompted
to disconnect it.
2. Follow the instructions on the displayed
screens.
• Click Next to move from one screen to
the next.
• Click Help to get additional information
about what is required on that screen.
To change from USB to wireless connection:
1. On the HP Photosmart front panel,
press the Wireless button to display the
Wireless menu on the printer display.
2. Select Wireless Settings, then Wireless
Setup Wizard on the display.
3. Follow the steps in the Wireless Setup
Wizard to connect the printer.
4. To add the printer, go to System
Preferences, select Print & Fax, then
click the + button under the Printers list
at the left. Select your printer from the
list.
English
