REMOTE SETUP FOR DYNAMIC IP ADDRESS FOR
1. Power up DVR
may ask to reboot,
2. Once DVR
out. Swi
tch type back to Static. NOTE: If IP A
wrote down.
3.
On your computer under Windows XP, Click Start > Run> in the field type CMD
window will pop up, type ipconfig /all (see example below).
4.
For windows 7 click Start> and type CMD in the “search program and files box”.
5.
6. Go to your DVR,
DNS. This info
rmation should already be in the fields,
Web Port
7. Go to www.dynd
that the host provides
. This will be your Public IP address from your ISP you will use to view
the DVR remotely.
M08-0436-000
REMOTE SETUP FOR DYNAMIC IP ADDRESS FOR
& FIRST ALERT DVRS
dvance > Network. Switch type to DHCP >
manually by going to advance >
>
Network and write down the IP Address that is grayed
tch type back to Static. NOTE: If IP A
ddress changed,
On your computer under Windows XP, Click Start > Run> in the field type CMD
window will pop up, type ipconfig /all (see example below).
For windows 7 click Start> and type CMD in the “search program and files box”.
ddress and your Gateway Address and DNS servers
etwork and enter the Subnet
rmation should already be in the fields,
if not enter
ort is 9000.
and create an account. Once complete,
. This will be your Public IP address from your ISP you will use to view
xample below).
1
REMOTE SETUP FOR DYNAMIC IP ADDRESS FOR
> exit. DVR
> REBOOT.
Network and write down the IP Address that is grayed
On your computer under Windows XP, Click Start > Run> in the field type CMD
. A black
For windows 7 click Start> and type CMD in the “search program and files box”.
ddress and your Gateway Address and DNS servers
.
rimary
ake sure the
IP address
. This will be your Public IP address from your ISP you will use to view
