www.EchoStore.com
www.EchoStore.com
local dealer)
2. Printer testing:
1) Check whether the printer is in normal condition, like mechanical status, lubrication status etc.
2) Print testing lines to ensure the printing head is good condition.
3) Print pictures to see whether the printing image is ok.
3. Installation Procedures:
Step 1: Preparation
Put the CISS on the left side of the printer. Pull out the small rubber plug from the Place 6pcs of air filters into air holes
and place all the tubes at correct position. air hole as picture shown above.
Step 2: Take out the original cartridges
Open the printer cover take out the original cartridges all cartridges move out
Step 3: Install Cartridges
Place CIS cartridges into the carriage Press those cartridges to make sure it Place the black position-limit part as above
is well installed. picture shown
