www.EchoStore.com
www.EchoStore.com
CIS for Epson Artisan 800/700/600 Instruction
www.EchoStore.com
Thank you for purchasing ST Continuous Ink Supply System. We appreciate your support and will try
our best to make your experience with our products a pleasant one. Printing has been a different
experience ever since you installed ST Continuous Ink Supply system on your own printer. Just
imagining being able to print without regard to the ink level in those expensive little cartridges.
Please take your time installing ST Continuous Ink Supply system. Do not remove your old cartridge
until you have the ST CIS system primed and ready to install (to prevent the drying of heads). In
addition, make sure you are getting perfect nozzle checks before installing the ST CIS system. The ST
CIS system won’t be able to work properly if the nozzles are previously clogged.
Most people get a perfect nozzle check the first time after installing the ST Continuous Ink Supply
system; others may need to run two or three cleaning cycles or let the printer sit for a while before they
get the perfect results.
1. General Guide:
1) Components
A. CIS system 1 set
B. Air filters 6 pcs
C. Short tube clip 1 set (2 pcs)
D. Printhead part 1 pc
E. Position-limit part 1 pc
F. Instruction CD 1 pc
2) Opening box inspection
a、Check whether all the accessories are ready.
b、Check whether there's the leakage of the CISS, whether some tubes have been separated from the CISS,
whether there are air bubbles in the tube (If there exists more than 20CM air space, please kindly to contact with the
