SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 802 CUSTOMER ACCESS MMC NUMBER
DESCRIPTION:
Allows the customer to have access to certain MMCs. For example, it is advised that the customer
have access to MMC 102 Call Forward for call forwarding but it is not advised that the customer
have access to MMC 710 LCR Digit Table for LCR dial plans. This MMC is for both tenants.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRSF 802
Display shows
MMC TENANT:1
100:STN LOCK:YES
2. Enter desired tenant number (1–2) via dial keypad
OR
Press UP or DOWN key to make selection and
Press RIGHT soft key to move cursor
MMC TENANT:1
100:STN LOCK:YES
3. Enter desired MMC number via dial keypad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
MMC TENANT:1
102:CALL FWD:YES
4. Enter 1 for YES or 0 for NO via dial keypad
OR
Press UP or DOWN key to make selection and press
LEFT soft key to return to step 3 to make additional
entries
MMC TENANT:1
102:CALL FWD:NO
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: Refer to the Table on the next page
RELATED ITEMS: MMC20 OPEN CUSTOMER PROGRAMMING
