
Enter the required security key.
Click Apply Change to implement new configuration settings.
“Mac Filter”:
This page is used to set allowed MAC addresses, and click the associated button for
each interface to enable/disable the MAC address control.
The current MAC control status is shown on the associated buttons.
Enable MAC
Filter
A checkbox that enables or disables the MAC Filter. When
selected, only the listed MAC address will be able to access the
Click Apply Change to apply the new MAC Filter configuration.
To Add a new MAC address in the list just enter the physical address of the desired
device (format XX:XX:XX:XX:XX:XX) and press the button Add.
To remove one MAC address from the list select the checkbox associated to that
address and press the button Remove.
4.1.4 Ports
Ports menu allow you to direct incoming traffic from the WAN side (identified by
Protocol and External port) to the Internal server with private IP addresses on the
LAN side.
A maximum of 32 entries can be configured.