4.1 Basic Settings
By clicking on the tab ‘Basic Settings’ you’ll be able to configure the different
common settings of your network.
These settings are divided into different categories on the left side of the window.
4.1.1 WAN Service
This option will allow you to set the PPP configuration or, on the contrary to disable
the WAN PPP client in order to use an external client/router (Bridge mode)
By clicking on “Dynamic line (NAT enabled)” the following menu will appear:
There you can set a different PPP username and password. To set the new values
press on ‘Apply Change’.
By clicking on “Bridge mode” the following menu will appear:
