NOTE: The WAN services shown here are those supported by the layer 2
interface you selected in the previous step. If you wish to change your
selection click the Back button and select a different layer 2 interface.
STEP 4: For VLAN Mux Connections only, you must enter Priority & VLAN ID tags.
STEP 5: You will now follow the instructions specific to the WAN service type you
wish to establish. This list should help you locate the correct procedure:
(1) For G2.1 PPP over ETHERNET (PPPoE), go to page 109.
(2) For G2.2 IP over ETHERNET (IPoE), go to page 115.
(3) For G2.3 Bridging, go to page 119.
The subsections that follow continue the WAN service setup procedure.
