Courtesy of Main Resource, Inc. Visit us at www.MainResource.com or call 800
362-6740 for all your telecom needs.
6 of 7
1. Select “ARDL” or press the automatic redial button programmed by your
installer.
The system will dial the number until you cancel the feature or after a specific
number of tries (set by your installer). The automatic redial light will flash
between redials and will be steady during redialing.
Storing a number you’ve just dialed:
1. Select “SAVE” and press an unused programmable button.
Store a number while you are on a call (not available on all systems):
1. Press the programmed “SAVE NUMBER REDIAL” button twice.
2. Following the prompt, dial the number you wish to save. Your call will not be
interrupted.
“Camping On” busy station automatic callback
Setting and using Camping On:
When you dial the station and you hear the busy signal, select “CAMP”. When your
call is connected, your telephone will ring with 5 tone bursts. Press “INTERCOM” or
“ANS”.
Cancel the call-back request:
Press “INTERCOM” and dial” *6”.
Setting Camping On at a station on “Do Not Disturb”:
Select “CAMP”. When the station is no longer in DND, your call-back request will go
through.
Waiting (Queuing) for a line
When a line becomes available you will hear several short tone bursts.
When all lines are busy:
1. Press “INTECOM”.
2. Dial the line group access code.
3. At the busy tone dial “*6”.
To queue for a particular line:
1. Press “INTERCOM”.
2. Dial “*6”.
3. Press the desired line button.
Cancel queue:
1. Press “INTERCOM”.
2. Dial “#6”.
Conference Calls
Note: When setting up a conference call with both outside and inside phones, you
must connect the outside lines first.
Set up a conference call:
1. Make the first call.
2. Select “CONF” (call is placed on hold).
3. Select next line and make the next call.
