Courtesy of Main Resource, Inc. Visit us at www.MainResource.com or call 800
362-6740 for all your telecom needs.
3 of 7
Handset Volume:
Lift handset. Press the volume up or down buttons.
(Note: when you hang up, the volume levels revert to default levels. See below to
change defaults)
Advanced
Change Default Handset and Speaker Volume:
1. Press “INTERCOM”.
2. Activate speaker, headset or handset mode to be affected.
3. Press the volume up or down buttons.
4. Dial ____ (Check with your system administrator – may be “**5” or “**7”)
or programmed SAVE button.
5. Repeat for each (speaker, headset, handset).
Answering Calls
If the phone rings and you do not want to answer it, you can press “DND” now.
Outside Calls (long tones):
1. Press the flashing line button.
2. Speak toward the phone or lift the handset.
Intercom Calls (2 short tones):
1. Press “INTERCOM”.
2. Speak toward the phone or lift the handset.
To respond to a call-waiting tone:
Place the current call on hold or complete the call and hang up. This second call will
ring through.
Using the “HOLD” feature
Place a call on hold:
1. Press “HOLD” station button.
Retrieve a call on hold:
1. Press the line button of the held call (light will be blinking) or press “TAP”.
Call Forwarding
To forward your calls:
1. Select “OPTIONS”.
2. Select “NEXT” until you see the “CFWD” option.
3. Select “CFWD”.
4. Choose “SET”.
5. Options:
a. Select “PERS” to forward prime line and intercom calls. Press “PERS”
again.
b. Select “ALL” to forward all calls. Press “ALL” again.
c. Select “NEXT” and “No ANS” to forward calls that ring at your station
but receive no answer after a predetermined number of rings. Press
“ALL” again.
6. Dial the extension number of the telephone to receive your forwarded calls.
