Chapter 3 - Parameters Summary AU/SU Device General Page
AlvariCRAFT Device Manager 210 User Manual
The following tables provide an at a glance summary of the configurable
parameters, value ranges, and default values. In addition, each parameter entry
also includes an indication as to whether the parameter is updated in run-time or
whether the unit must be reset before the modification takes effect ("No" in the
Run-Time column indicates that a change to the parameter will take effect only
after reset).
3.1 AU/SU Device General Page
3.2 Air Interface General Page
Parameter Unit Range Default Run-Time
Ethernet Negotiation
Mode
AU, SU,
BU, RB
Force 10 Mbps and Half-Duplex
Force 10 Mbps and Full-Duplex
Force 100 Mbps and Half-Duplex
Force 100 Mbps and Full-Duplex
Auto Negotiation Mode
Auto Negotiation
Mode
No
Parameter Unit Range Default Run-Time
Maximum Number Of
Associations
AU 0 to 512 for a regular AU (0 to 124
when data encription is enabled), 0 to
8 for AUS
AU: 512
AUS: 8
Yes
Antenna Gain (dB) AU, SU,
BU, RB
without
integral
antenna
0-40 (dB) According to unit
type
No
Lost Beacon Wathdog
Threshold
AU, BU 100 - 1000 or 0 (0 means Not Used) 218 Yes
Wireless Trap
Threshold (%)
AU, BU 1-100 (%) 30 (%) No
Scanning Mode SU, RB
Passive
Active
Passive No
