8
Other
Power, WPS
Dimensions (L × W × H) (mm)
168 x 117 x 33 (mm)
Chapter 3: Hardware Installation
3.1 Panel Layout
3.1.1 Panel Layout
LED Indicators
Name Action Description
Power LED
Off No electric power
On (Solid) Router is powered
SYS LED
Off Faulty
On (Flashing) Router Working properly
WLAN LED
Off Wireless functionality not enabled
On (Solid or Flashing) Wireless is enabled
WPS LED
On (Flashing) WPS search initiated
Off WPS normal operation
WAN / LAN LED’s
Link/Activity
Off Port is not connected equipment
On (Solid) Port is connected to a device
On (Flashing) Port is receiving and sending data
3.1.2 Rear Panel
1) Power (power jack): This jack connects to the included power supply.
Note: You must use the supplied power supply; if you use a different power supply you may
permanently damage the router.
2) 1- WAN Port (RJ-45): The WAN port connects to your Cable modem, xDSL modem, or
another Ethernet connection that provides your Internet service. Connection is made using
a standard Ethernet cable.
3) 4- LAN Ports (RJ-45): The LAN ports can be used where a wired Ethernet connection is
possible. The LAN ports can connect to an Ethernet hub, switch or other Ethernet enabled
device on the network.
4) Reset Button: If you have password protected your router and have forgotten the password,
or if you would like to set your router back to the factory defaults; press and hold the reset
button for about 8 seconds. The SYS light will go off, the system will re- restart, and the
