11
192.168.1.1 is the default router IP address.
Users will see the following login page where a User Name and Password box will be
displayed. Enter the user name and password (The WR300NQ default user name and
password are "admin"), click the "OK" button. You will then enter the router configuration
menu.
Note: If you changed the WR300NQ's default IP address, you will need to use the new IP
address you chose in order to access the WEB management interface.
Note: The router's default username and password are set to “admin” at the factory.
You can change the default username and password in the router settings page. If you have
forgotten your username and password, you can use the reset button to restore the router to
the original factory settings, including the default user name and password.
If after entering the router IP address in your internet browser and pressing “return”, ensure that
your Ethernet cable is connected directly between your PC and one of the four LAN ports of the
router. Make sure the router has been powered on for at least 30 seconds. Make sure you use
the proper IP address in your web browser to access the router. The router default IP address is
192.168.1.1.
After a successful login the main menu will be shown on the left of the page. The menu
contains the following menu items Setup Wizard, Wireless, WAN Setting, LAN, Security,
Service, Management, and Status. You may choose any of the menu items to access the
associated sub-menu items. Within each sub-menu you can set up the corresponding functions.
More detail regarding the various menu items is given below.
