R
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Entering the vehicle
7
5. Approach illumination:
When approaching the vehicle during
darkness, press to switch on the
approach illumination. Press again to
turn the approach lamps off.
The approach illumination period set at
the factory is 30 seconds. This delay
period may be configured to provide
illumination lasting between 0 and 240
seconds. See 40, INSTRUMENT
PANEL MENU.
Note: In some markets a second press of
the button will turn on the headlamps and
reversing lamps. A third press will be
required to turn the lamps off.
6. Emergency key access: Slide open the side
cover to release, then remove.
7. Remove the emergency key blade and
unfold.
8. If the Smart key fails to open the vehicle,
insert the key blade into the slot at the base
of the door lock cover. The door lock cover
is marked with a key symbol. To release the
cover, gently lever the key blade upwards.
Carefully twist the key blade, to lever the
cover off the retaining clips. Insert the key
blade into the exposed lock and turn to
operate the lock. The alarm will sound. To
disarm the alarm, see 84, KEYLESS START
BACKUP.
Note: When replacing the door lock cover,
locate the top retaining clips before
pushing the cover into position.
Note: When the left front door is unlocked
using the key blade, the alarm will sound
until the Smart key is positioned correctly.
Note: A replacement Smart key can be
obtained only from your Dealer/Authorised
Repairer. The Dealer/Authorised Repairer
will require proof of identification and
ownership.
Notify your Dealer/Authorised Repairer
immediately if a Smart key is lost or stolen.
9. Keyless entry/exit:
Exterior door handles have separate
unlock and lock sensors. The unlock
sensor is located on the inner surface
of the handle.
SINGLE/MULTI-POINT ENTRY
When you press the unlock button, the vehicle
will unlock in 1 of 2 ways:
1. Single-point entry: Unlocks the driver's
door and fuel filler flap only. A second
press is required to unlock the remaining
doors and the tailgate.
2. Multi-point entry: Unlocks all of the doors,
the fuel filler flap and the tailgate on the
first press.
To change from Single to Multi-point entry (or
vice versa), press both the lock and unlock
buttons simultaneously for 3 seconds. The
hazard warning lamps will flash twice to
confirm the change.
This feature may also be set via the settings
menu. See 40, INSTRUMENT PANEL MENU.
Note: If, when the vehicle is unlocked, an
audible warning is emitted, this will be a
mislock error. There may be a fault with either
of the alarm sensors. Consult a
Dealer/Authorised Repairer as soon as
possible.
GLOBAL OPENING
Press and hold the Smart key unlock button for
3 seconds to unlock the vehicle and open all the
windows.
Press any button on the Smart key to cancel
the operation.
