
L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Entering the vehicle
6
The vehicle is supplied with 2 Smart keys. The
Smart keys act as remote controls for the
locking and alarm system and allow the vehicle
to be locked, unlocked and driven without the
use of a conventional key. See 8, KEYLESS
ENTRY, 15, KEYLESS LOCKINGand 83,
STARTING THE ENGINE. Each Smart key also
has an emergency key housed in a slide out
compartment.
1. Lock:
Press to secure the vehicle. The vehicle
can be Single or Double locked. See
13, SINGLE LOCKING. See 13,
DOUBLE LOCKING.
See also 14, GLOBAL CLOSING.
2. Unlock:
Press briefly to unlock the vehicle and
deactivate the alarm. The hazard
warning lamps will flash twice to
indicate that the vehicle is unlocked
and the alarm has been deactivated.
The interior lamps and puddle lamps
will illuminate to assist entry to the
vehicle.
Power-fold mirrors will unfold (if
enabled). See 7, GLOBAL OPENING.
3. Tailgate release:
Press briefly to open the tailgate. If the
vehicle is locked and armed, the
security system will remain active
while the tailgate is open, but intrusion
and inclination sensing systems will be
disabled.
When closing the tailgate again, if the
vehicle is already locked and armed,
the hazard warning lamps will flash
after a few seconds to confirm that the
full alarm system has been reactivated.
There will also be an audible sound if
the vehicle was double locked. See 9,
OPENING AND CLOSING THE
TAILGATE. See also 10, OPENING AND
CLOSING THE POWERED TAILGATE.
Make sure the Smart key does not
remain in the vehicle prior to
closure. If the vehicle is in an area
of localised Radio Frequency (RF)
interference or the Smart key is
shielded by metal objects, the
vehicle may close and lock with no
means of opening again.
4. Panic alarm:
Press and hold for 3 seconds (or press
3 times within 3 seconds) to activate
the horn and the hazard lamps.
Once active for more than 5 seconds,
the alarm can be cancelled by pressing
the button and holding for 3 seconds
(or pressing 3 times within 3 seconds).
The emergency alarm will also be
cancelled if a valid Smart key is present
when the START/STOP button is
pressed.