L
(FM10) SEMCON LAND ROVER OWNER GUIDE VER 2.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: Range
Rover Evoque
Exiting the vehicle
14
Movement is detected within the vehicle's
interior.
A window, front or rear screen or
panoramic sunroof glass is broken.
The vehicle is raised or tilted.
In some markets where a battery backed
sounder is fitted the following actions will also
sound the alarm:
The vehicle battery is disconnected.
An attempt is made to disconnect the alarm
siren.
Note: In this state, an open window may cause
the alarm to sound due to the movement of air
currents. For this reason, make sure all of the
windows are fully closed before Double locking
the vehicle.
LOCK CONFIRMATION
If you are uncertain whether the vehicle is
locked and armed (either by Single or Double
locking), press either the Smart key lock button
or, if Keyless entry is fitted, touch an exterior
door handle lock sensor. The hazard warning
lamps will flash once to indicate and confirm
the current lock status.
Note: If the vehicle is not already locked and
armed, pressing the lock button will single lock
the vehicle. Press again to double lock, if
required.
AUTOMATIC RELOCKING AND
RE-ARMING OF THE ALARM
If a door, the tailgate or the bonnet are not
opened within 40 seconds of unlocking the
vehicle via the Smart key, all of the doors will
re-lock automatically to the previous locked
state and the alarm will re-arm.
MISLOCK
When locking the vehicle with the Smart key a
mislock can occur if:
One or more of the doors, the bonnet or the
taildoor is not fully closed.
The ignition is ON.
A Smart key is left in the vehicle.
If any of the above are present, the vehicle will
NOT lock and there will be an audible mislock
error warning. The hazard warning lamps will
NOT flash and the door mirrors (if enabled) will
NOT fold in. Check that all of the doors, the
bonnet and the tailgate are closed properly.
Make sure the ignition is turned OFF and lock
the vehicle again. If the mislock persists,
consult your Dealer/Authorised Repairer.
GLOBAL CLOSING
Make sure no children, pets, or
obstructions are in any open aperture
before operating global closing.
Make sure all of the doors are closed. Press
and hold the Smart key lock button for 3
seconds. The vehicle will single lock and the
alarm will be armed immediately. After 3
seconds any open windows will be closed.
Keyless global closing (if enabled) can be
operated by touching the door lock sensor for
3 seconds. This will also single lock the vehicle
and activate the alarm.
Note: The windows will close only while the
door lock sensor is covered. To fully secure the
vehicle, continue to touch the door lock sensor
until all the windows are fully closed.
Note: Global closing can be enabled and
disabled via the Vehicle Set-up Instrument
panel menu. See 40, INSTRUMENT PANEL
MENU.
