4
CHANGE VIEWPOINT LOGIN OPTIONS
To change ViewPoint login options
1. Start ViewPoint as described in the
previous section. If your system logs you
on automatically, you can change the
options after ViewPoint starts by choosing
File > Use a different station. The
expanded ViewPoint Log On dialog opens:
2. In the Use this phone with ViewPoint
section, specify the phone with which
ViewPoint is associated in one of the
following ways:
• Default station ID. Select this option to
use one of the following as your
ViewPoint phone. (You can select this
option for a Wave phone in the office
or a mobile extension.)
Default station ID of your physical phone. This is typically your own phone at your own
location.
Your primary softphone. If you do not have a physical phone, you can use the
ViewPoint Softphone to place and take calls, using your PC’s microphone and speakers,
headset, or other USB audio devices. S
Note: A physical phone or a primary softphone is configured for you by your Wave
administrator when you are added to the system.
• Station ID. To log on to ViewPoint using a different Wave phone, for example if you are a
guest at another location or temporarily using a different office, select this option and enter
that phone’s station ID. To obtain a Wave phone’s station ID, pick up the phone and press
*00. (You can select this option for a Wave phone in the office or a mobile extension.)
• Remote number. Select this option to log on to ViewPoint using a phone that is external to
the Wave system, for example if your Wave system administrator has configured you to use a
mobile extension. Enter the phone number of that phone, for example 6175551212. Click to
open the Check Remote Number dialog to view or make corrections to the actual dial string
that will be used based on the remote number that you enter here
