Note
• We recommend setting the "TEL Line Level
Reduction" setting to "On" when establishing
conference calls that use the TEL line (see
page 54).
Adding a PS or PC line call to an IP call
1. Confirm that the "Line Selection" setting is set
to "IP + PS" or "IP + PC" as necessary (see
page 33).
2. Press
to put the current call on hold.
3. Press the left function button ([F1]) to select the PS
or PC line.
Example: Pressing
to select the PS line.
The IP line is selected. The PS line is selected.
[F1]
4. Make a call using the PS or computer.
5. After the called party answers, press
to
begin the conference call.
• Before beginning the conference call, press
to end the second call and return to the
original call.
Note
• When the operation mode is set to "USB
Audio", conference calls cannot be made.
Ending a Conference Call
Press [ ] to disconnect both parties.
or
1. Press
.
• Press
to continue the call.
2. Press [ ] or [ ] to select the party you would like
to remove from the conference, then press
.
• The selected party is disconnected and you can
continue to speak with the remaining party.
• To disconnect both parties, select "All", then
press
.
Document Version 2011/06 Operating Instructions 37
Making and Answering Calls
