2. Initial Preparation
Selecting the receive mode
This unit combines the function of telephone, facsimile and answering system. To perform these functions,
this unit has three types of receive modes; ANS/FAX, FAX and TEL.
Regardless of the mode that you select, you can always place calls and send faxes. The descriptions below
will help you understand how the unit can work for you.
ANS/FAX mode:
This mode can be used when you wish the unit to record voice messages and/or receive fax messages.
When a call is received, the unit will play the common greeting message. If a voice call is detected, the
answering system will begin recording, then caller can leave a voice message. If a fax call is detected, the unit
will switch to the fax and receive fax documents.
FAX mode;
We recommend that you select this mode when you will be using the unit solely as a fax machine. The unit .
will automatically answer all calls and generate fax tones to the callers. Callers will hear fax tones and will
only be able to transmit faxes.
TEL mode:
This mode can be used when you wish to answer all calls manually. The unit will not automatically answer fax
and voice calls. If you wish to answer a fax call, you can start reception by pressing the START/SET button.
If no one answers an incoming call by 15 rings, the receive mode will switch to the ANS/FAX mode
automatically.
Select the desired mode by pressing [RECEIVE MODEJ repeatedly. The arrow mark in the display shows
your selection.
(RECEIVE MODE]
16
