2. Initial Preparation
Before using your unit, program the foiiowing:
•Current date and time
•Your logo
•Your facsimile telephone number
This information will be printed on the top of each page transmitted from your unit.
Setting the date and time
1
2
3
4
Press [MENU],
SYSTEM SET UP
SET DATE & TIME
Press (^, then [[].
Press [START/SET].
Enter the correct month/day/year/hour/minute
by selecting each 2 digits.
Then press @ for AM or press @ for PM.
Example: Aug. 10 1995, 3:00PM
Press 00 0000 00,
then press 0 for PM.
5
6
Press [START/SET].
Press [MENU].
(STOP)
Note;
•When you make a mistake while programming,
press [ STOP 1 then make the corrections.
•The accuracy of the clock will be approximately
±60 seconds a month.
Setting your logo
Usually the logo is a company, division or personal name in an abbreviated form.
Press [MENU].
1
2
3
4
5
6
SYSTEM SET UP
Press [«], then [0 [0.
YOUR LOGO
Press [START/SET].
LOGO=
Enter your logo up to 30 characters.
(The preset logo will be cleared.)
• Refer to the instructions on page 13.
Press [STA^/SEf].
Press [MENU].
12
