Table 34. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup
Backup SP USB Enable or disable ’Backup
SP USB’ as an option.
When enabled, the system
service partition can be
backed up to the USB
drive. Default: Disabled.
Backup
Backup SP
Network
Enable or disable ’Backup
SP Network’ as an option.
When enabled, the system
service partition can be
backed up to the network.
Default: Disabled.
Backup
CPU Priority CPU Priority of backups.
Values: 1-5 (1=Lowest
Priority, 5=Highest
Priority). Default: 3.
Backup
Yield ’Yield’ indicates amount of
delay to insert between disk
writes during a backup.
This permits system
backups from hogging all
of the disk i/o bandwidth.
Values: 0-8 (0=off, 8=least
disk activity) Default: 0.
Backup
Boot Disc Enable or disable the
creation of a ’Boot Disc’
when backing up to
CD/DVD or creating an
archive to those media.
Default: Enabled.
Backup
VerifyDisc Enable or disable ’Verify
Disc’ when backing up to a
CD/DVD or creating an
archive to those media.
Default: Enabled.
Backup
Battery Percent
Required
’Battery Percent Required’
before commencing a
scheduled backup. This
policy ensures there is
enough battery power left
to complete a backup.
Values: 0-100. Default: 0.
Backup
Skip Locked
Files
Enable or disable ’Skip
Locked Files’ when backing
up. If enabled, locked files
will be not be backed up.
Default: Disabled.
Backup
Min Percent
Free Space
The minimum percent of
free space on the
destination drive required
for backup. Values: 0-100.
Default: 0.
Appendix A. Command-line tools 117
