- A full beard
- A moustache
- A goatee
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the shaver, its accessories and the Jet
Clean System (RQ1187CC only).
The best and most hygienic way to clean the shaver is in the Jet Clean -
System (RQ1187CC only). You can also rinse the shaver under the tap
or clean it with the brush supplied.
Clean the shaver after every shave for optimal shaving performance. -
You can clean the outside of the shaver with a damp cloth. -
Regular cleaning guarantees better shaving performance. -
Cleaning the shaving unit
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
1 Switch off the shaver. Remove it from the charger or remove it from
the Jet Clean System (specifi c types only).
2 Rinse the shaving unit under a hot tap for some time.
Note: You can also clean the shaving unit with the cleaning brush supplied.
3 Pull the shaving head holder off the bottom part of the shaving unit
and rinse it under a hot tap for 30 seconds.
Note: You can also clean the shaving head holder with the cleaning brush
supplied.
4 Carefully shake off excess water and let the shaving head holder dry.
Never dry the shaving unit with a towel or tissue, as this may damage the
shaving heads.
5 Reattach the shaving head holder to the bottom part of the shaving
unit (‘click’).
Cleaning the shaving unit in the Jet Clean System (RQ1187CC
only)
The Jet Clean System has an automatic cleaning program. When you press
the on/off button, the Jet Clean System starts cleaning in this automatic
cleaning program.
Preparing the Jet Clean System for use
Fill the cleaning chamber before fi rst use.
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
The holder automatically moves to the highest position. ,
3 Simultaneously press the release buttons on both sides of the
cleaning chamber (1). Then lift the Jet Clean System off the cleaning
chamber (2).
The cleaning chamber remains behind. ,
4 Unscrew the cap from the bottle with HQ200 cleaning fl uid.
- A full beard
- A moustache
- A goatee
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the shaver, its accessories and the Jet
Clean System (RQ1187CC only).
The best and most hygienic way to clean the shaver is in the Jet Clean -
System (RQ1187CC only). You can also rinse the shaver under the tap
or clean it with the brush supplied.
Clean the shaver after every shave for optimal shaving performance. -
You can clean the outside of the shaver with a damp cloth. -
Regular cleaning guarantees better shaving performance. -
Cleaning the shaving unit
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
1 Switch off the shaver. Remove it from the charger or remove it from
the Jet Clean System (specifi c types only).
2 Rinse the shaving unit under a hot tap for some time.
Note: You can also clean the shaving unit with the cleaning brush supplied.
3 Pull the shaving head holder off the bottom part of the shaving unit
and rinse it under a hot tap for 30 seconds.
Note: You can also clean the shaving head holder with the cleaning brush
supplied.
4 Carefully shake off excess water and let the shaving head holder dry.
Never dry the shaving unit with a towel or tissue, as this may damage the
shaving heads.
5 Reattach the shaving head holder to the bottom part of the shaving
unit (‘click’).
Cleaning the shaving unit in the Jet Clean System (RQ1187CC
only)
The Jet Clean System has an automatic cleaning program. When you press
the on/off button, the Jet Clean System starts cleaning in this automatic
cleaning program.
Preparing the Jet Clean System for use
Fill the cleaning chamber before fi rst use.
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
The holder automatically moves to the highest position. ,
3 Simultaneously press the release buttons on both sides of the
cleaning chamber (1). Then lift the Jet Clean System off the cleaning
chamber (2).
The cleaning chamber remains behind. ,
4 Unscrew the cap from the bottle with HQ200 cleaning fl uid.
RQ1187CC-87-67_EN_A6_CS3.indd 43 13.5.13 2:44:41 PM
