- The remaining battery capacity is indicated by the number of charging
lights that are on.
Travel lock
You can lock the shaver when you are going to travel. The travel lock
prevents the shaver from being switched on by accident.
Activating the travel lock
1 Press the on/off button for 3 seconds to enter the travel lock mode.
, The lock symbol lights up on the display.
Note: The displays of the various shaver types look different, but show the
same symbol.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
The motor starts running to indicate that the travel lock has been ,
deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in charger or Jet Clean System,
the travel lock is automatically deactivated.
Replace shaving head holder
Note: The displays of the various shaver types look different, but show the
same symbol.
For maximum shaving performance, we advise you to replace the shaving
head holder every two years.
- To remind you to replace the shaving head holder, the appliance is
equipped with a replacement reminder which is activated automatically
after approx. two years. The replacement reminder is repeated at 9
successive shaves or until you reset the shaver.
Charging
Charging takes approx. 1 hour.
RQ1187CC, RQ1187: A fully charged shaver has a shaving time of up to 50
minutes.
RQ1167: A fully charged shaver has a shaving time of up to 45 minutes.
Charge the shaver before you use it for the fi rst time and when the display
indicates that the battery is almost empty (see section ‘Battery low’ in
chapter ‘The display’).
Quick charge
After the shaver has charged for 5 minutes, it contains enough energy for
one shave.
Charging in the charger
1 Insert the small plug into the charger.
2 Unfold the charger (‘click’).
3 Put the adapter in the wall socket.
4 Put the shaver in the charger (1) and press it backwards until it locks
into place (2).
The display shows that the shaver is charging (see section ‘Charging’ ,
in chapter ‘The display’).
Charging in the Jet Clean System (RQ1187CC only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
- The remaining battery capacity is indicated by the number of charging
lights that are on.
Travel lock
You can lock the shaver when you are going to travel. The travel lock
prevents the shaver from being switched on by accident.
Activating the travel lock
1 Press the on/off button for 3 seconds to enter the travel lock mode.
, The lock symbol lights up on the display.
Note: The displays of the various shaver types look different, but show the
same symbol.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
The motor starts running to indicate that the travel lock has been ,
deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in charger or Jet Clean System,
the travel lock is automatically deactivated.
Replace shaving head holder
Note: The displays of the various shaver types look different, but show the
same symbol.
For maximum shaving performance, we advise you to replace the shaving
head holder every two years.
- To remind you to replace the shaving head holder, the appliance is
equipped with a replacement reminder which is activated automatically
after approx. two years. The replacement reminder is repeated at 9
successive shaves or until you reset the shaver.
Charging
Charging takes approx. 1 hour.
RQ1187CC, RQ1187: A fully charged shaver has a shaving time of up to 50
minutes.
RQ1167: A fully charged shaver has a shaving time of up to 45 minutes.
Charge the shaver before you use it for the fi rst time and when the display
indicates that the battery is almost empty (see section ‘Battery low’ in
chapter ‘The display’).
Quick charge
After the shaver has charged for 5 minutes, it contains enough energy for
one shave.
Charging in the charger
1 Insert the small plug into the charger.
2 Unfold the charger (‘click’).
3 Put the adapter in the wall socket.
4 Put the shaver in the charger (1) and press it backwards until it locks
into place (2).
The display shows that the shaver is charging (see section ‘Charging’ ,
in chapter ‘The display’).
Charging in the Jet Clean System (RQ1187CC only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
RQ1187CC-87-67_EN_A6_CS3.indd 37 13.5.13 2:44:28 PM
