Replacing the Front I/O Panel: Dell XPS 430 Service Manual
iopanel.htm[4/15/2014 11:28:32 AM]
1 Bezel tabs (6) 2 Bezel screws (2)
4. Remove the processor airflow shroud (see Replacing the Processor Airflow
Shroud Assembly).
5. Remove the processor fan assembly (seeReplacing the Processor Fan Cage and Replacing the Processor Fan) and the
card fan (seeReplacing the Card
Fan).
6. Disconnect the control-panel cable from the I/O panel connector by pulling the cable loop.
7. Disconnect the power panel cable, 1394 cable, and audio cable (if it exists) so that the entire front I/O panel is free from
all cables.
1 Front I/O panel 2 mounting screws (2)
8. Remove the two screws that hold the I/O panel assembly to the front of the chassis.
9. Gently ease out the lower end of the I/O panel assembly first from its groove on the chassis followed by the upper end.
