Installing System Components 109
Hard Drives
The following are examples showing the installation and removal procedures
for the 2.5-inch and the 3.5-inch hard drives.
Removing a 2.5-inch Hard Drive
1
Remove the sled from the system. See "Sled Configuration" on page 101.
2
Remove the hard drive from the sled docking bay.
3
Select the hard drive to replace and remove the four hard drive bracket
screws securing it underneath the sled.
Figure 3-7. Removing the 2.5" Hard Drive Bracket Screws
4
Remove the hard drive from the sled docking bay.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
Bottom of sled
Top of sled
