Installing System Components 111
Installing a 2.5-inch Hard Drive
1
Align the 2.5-inch hard drive bracket on the new hard drive then replace
the four screws.
Figure 3-10. Aligning the 2.5" Hard Drive Bracket
NOTE: The correct orientation of the bracket is with the arrow mark pointing
towards the hard drive connector.
2
Connect the hard drive to the hard drive board in the sled.
Figure 3-11. Connecting the 2.5" Hard Drive to the Hard Drive Board
3
Replace the sled hard drive bracket screws underneath the sled.
HDD0
2.5” HDD
HDD1
2.5” HDD
HDD2
2.5” HDD
HDD3
2.5” HDD
