32
Procedure:
1
Select the
LAN Interface
from the drop down list.
2
Check
Enable
to enable the LAN Settings.
3
In IPv4 Configuration, enable
Use DHCP to Obtain an IP address
automatically
to dynamically configure IPv4 address using DHCP.
4
If the field is disabled, enter the
IPv4 Address
,
Subnet Mask
and
Default
Gateway
in the respective fields.
5
In IPv6 Configuration, if you wish to enable the IPv6 settings, check
Enable
.
6
If the IPv6 setting is enabled, enable or disable the option
Use DHCP for
obtaining the IP address automatically
.
7
If the field is disabled, enter the
IPv6 Address
,
Subnet Prefix length
and
Default Gateway
in the given field.
8
In VLAN Configuration, if you wish to enable the VLAN settings, check
Enable
.
9
Enter the
VLAN ID
in the specified field.
10
Enter the
VLAN Priority
in the specified field.
11
Click
Save
to save the entries.
12
Click
Reset
if you want to reset the modified changes.
VLAN Priority The priority for VLAN configuration.
• Value ranges from 1 to 7.
• 7 is the highest priority for VLAN.
Save To save the entries.
Reset To Reset the modified changes.
Table 1-16. Network Settings
Item Description
