Produtos da Marca Dell

Back to Contents Page

 Front Stand

Dell™Inspiron™One2205ServiceManual

Removing the Front Stand

Replacing the Front Stand



Removing the Front Stand



1. Follow the instructions in Before You Begin.



2. Remove the back cover (see Removing the Back Cover).



3. Remove the three screws that secure the front-stand assembly to the computer.



4. Lift the rear stand so that the front stand is accessible.



5. Carefully push and release the tab that secures the front-stand assembly to the middle frame.



6. Release the tabs that secure the I/O bracket to the middle frame.



7. Lift the front-stand assembly away from the computer.



8. Remove the three screws that secure the I/O bracket to the front stand.



9. Release the four tabs that secure the I/O bracket to the front stand.



10. Remove the I/O bracket from the front stand.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

screws (3)

rear stand

tab

front-stand assembly