Replacing the Back Cover
1. Follow the procedures in Before You Begin.
2. Lift the chassis from the clean surface.
3. Turn the chassis over and align the screw holes on the chassis with the screw holes on the back cover.
4. Replace the ten screws that secure the back cover to the chassis.
5. Replace the display bezel (see Replacing the Display Bezel).
6. Replace the speaker cover (see Replacing the Speaker Cover).
7. Replace the decorative cover (see Replacing the Decorative Cover).
8. Replace the screw that secures the back cover to the computer.
9. Replace the optical drive (see Replacing the Optical Drive).
10. Replace the computer stand (see Replacing the Computer Stand).
11. Replace the I/O cover (see Replacing the I/O Cover).
12. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.