Produtos da Marca Dell

Back to Contents Page

 Back Cover

Dell™Inspiron™One19ServiceManual

Removing the Back Cover

Replacing the Back Cover



Removing the Back Cover



1. Follow the procedures in Before You Begin.



2. Remove the I/O cover (see Removing the I/O Cover).



3. Remove the computer stand (see Removing the Computer Stand).



4. Remove the optical drive (see Removing the Optical Drive).



5. Remove the screw that secures the back cover to the computer.



6. Remove the decorative cover (see Removing the Decorative Cover).



7. Remove the speaker cover (see Removing the Speaker Cover).



8. Remove the display bezel (see Removing the Display Bezel).



9. Remove the ten screws that secure the back cover to the chassis.



10. Lift the chassis away from the back cover, turn the chassis over, and keep it on a clean surface.



11. Place the back cover in a secure location.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

screw