5. Connect your computer and all attached devices to electrical outlets, and turn them on.
Display Cable
Removing the Display Cable
1. Follow the procedures in Before You Begin.
2. Remove the display panel (see Removing the Display Panel).
3. Turn the display panel over.
4. Lift the conductive tape that secures the display cable to the display-panel connector; press the securing clips on either side of the display-panel
connector and disconnect the display cable.
5. Lift the display cable off the display panel.
Replacing the Display Cable
1. Follow the procedures in Before You Begin.
2. Slide the display cable into the display-panel connector until it is fully seated and secure the display cable with the conductive tape.
3. Turn the display panel over.
4. Replace the display panel (see Replacing the Display Panel).
5. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
