Back to Contents Page
Display
Dell™Inspiron™One19ServiceManual
Display Panel
Display Cable
Display Panel
Removing the Display Panel
1. Follow the procedures in Before You Begin.
2. Remove the system board (see Removing the System Board).
3. Turn the computer over.
4. Remove the four screws that secure the display panel to the chassis.
5. Remove the display cables from the routing guides on the chassis.
6. Lift the display panel off the chassis.
Replacing the Display Panel
1. Follow the procedures in Before You Begin.
2. Guide the display cables through the routing guides on the chassis.
3. Replace the four screws that secure the display panel to the chassis.
4. Replace the system board (see Replacing the System Board).
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
